Bulk Material Equipment
Search
Close this search box.
Bulk Material Equipment
Search
Close this search box.
Bulk Material Equipment
Search
Close this search box.
Bulk Material Equipment

Diverter Valves – Model BDV

long red dash dot dot
young industries logo

Model BDV – Bucket Diverter

The Young Industries, Inc. Bucket Diverter Valves, are used in a wide variety of gravity flow bulk material applications where cross contamination is not a problem. The Bucket Diverter Valves are designed with one diversion leg offset either 30° or 45° from the inlet leg.

Flange Mounted Bearing provide a smooth operation.

“O” ring seals on each end of the bucket shaft prevent dust leakage to the exterior. The flange mounted bearing provide smooth and rugged operation.

The Bucket Diverter Valve is offered either as 30°diversion leg offset, or as 45° diversion leg offset. The change of direction is accomplished by changing the position of the bucket diverter plate from one line to the other by a rotary actuator.

Description

The Bucket Diverter Valve has heavy construction, and the valve’s actuator is directly coupled to the bucket shaft . This arrangement distributes torque directly to the bucket shaft, eliminating stress to the valve components. This keeps production loss, downtime and maintenance cost to a minimum.

As a result, the Young Industries, Bucket Diverter Valves have been proven to provide superior performance and reliability in a wide range of bulk materials handling applications, thus offering low cost of ownership.

younginds diverter valve Model-BDV
younginds diverter valve Model-BDV
Application Information
  • The Bucket Diverter Valves are designed for mounting on a gravity discharge line to divert from a single inlet to one of two outlets and were cross venting is not a problem
  • The Young Industries, Inc. Bucket Diverter Valves, are used in a wide variety of gravity flow bulk material applications were cross contamination and inter-venting is not a problem.
  • The Bucket Diverter is designed for a 2 PSIG internal or external pressure. It is available in standard sizes from 4″ through 16″ square flange sizes. Round flange are available.
  • Two Models of the Bucket Diverter Valve are offered. One model has 30°diversion leg offset and the other has a 45° diversion leg offset. The change of direction is accomplished by changing the position of the bucket diverter plate from one line to the other by a rotary actuator.
  • The Bucket Diverter Valve has heavy construction, and the valve’s actuator is directly coupled to the bucket shaft . This arrangement distributes torque directly to the bucket shaft, eliminating stress to the valve components. This keeps production loss, downtime and maintenance cost to a minimum.
  • Flange Mounted Bearing provide a smooth operation.
    “O” ring seals on each end of the bucket shaft prevent dust leakage to the exterior. The flange mounted bearing provide smooth and rugged operation.
  • The Young industries Bucket Diverter Valves are available with a variety of features to handle a wide range of process requirements.
 
Standard Features
  • Two (2) PSIG Housing and differential pressure or vacuum
  • Fabricated designs
  • Materials of construction: fabricated carbon steel, fabricated stainless steel or fabricated aluminum
  • Raw materials are traceable to standard specifications with ASTM the most used specification
  • Square inlet flange
  • Square discharge flanges
  • Up to 250°F operation temperature, with designs offered to withstand up to 1600°F temperature
  • Flange mounted precision ball bearings
  • “O” ring shaft seals
  • Heavy shafts secured to eliminate shifting in the housing
  • Grounding and bonding connection to NFPA specifications
  • Painted blue enamel or Steelcote stainless steel paint
  • Completely assembled and tested.
Options & Accessories
  • Rotary pneumatic operator, with NEMA 4 single solenoid valves, single-pole double-throw and two (2) limit switches – one indicating for each leg.
  • Electric operator, with two (2) limit switches – one switch for each leg.
  • Manual operator
  • High pressure design available
  • High temperature design available
  • Round inlet and outlets with 150 lbs drilling flanges
  • Inspection door
  • Special sizes available
  • Special materials of construction including: 316 Stainless steel, Hastelloy, Titanium
  • Interior coating to provide abrasive resistance to material release including: chrome plating, nickel plating, tungsten carbide, Stellite, Teflon
  • Interior polishes and cleanup
  • Special seal materials as graphite, food grade TPFE
  • Special bucket designs available
  • Painted or coated per customers specification